INSTRUCTIONS AND REQUIREMENTS1. Prepare a complete set of working drawings:-

| April 14, 2018

INSTRUCTIONS AND REQUIREMENTS
1. Prepare a complete set of working drawings:
– Create dimensioned detail drawings of the specified non-standard components (one drawing per sheet).
– Create an orthographic general assembly drawing with parts list on one sheet.
2. When preparing the assembly drawing, use separate balloons and numbers for each part in each view or use only one balloon in the view that most clearly identifies the part. It is also essential to distinguish between parts when applying section lines (hatching) to the components.
3. When preparing detail drawings, identify every drawing by listing the part name and number. This must be consistent with parts list on assembly drawing.
4. Create all drawings in THIRD-ANGLE PROJECTION system*. FAILURE TO COMPLY WITH THE GIVEN PROJECTION SYSTEM WILL ATTRACT ZERO MARK.
5. Drawing elements, including the sheet layout and title block, shall conform to the specifications given in the lecture notes or Australian drawing standards.
6. Drawings of standard parts are not required. However, complete specifications for such components must be provided in the parts list.
7. Drawings should be created on AutoCAD and need to be complete in all aspects, including dimensioning. Incorrect / incomplete dimensioning will not be accepted.
8. Where necessary, views should be labelled appropriately.
9. Centre your drawings in the drawing area.
10. Leave a space of about 50 mm between views. Also, leave a reasonable space between the views and borders.
11. The drawing elements, such as object features, dimensioning elements, title blocks, labels, scale and notes must be legible on all drawings.
12. A half-page executive summary reflecting the project objective, methodology and learning outcome needs to be included.
13. Provide explanations and assumptions, if any, on a separate sheet.
14. The report shall also include a title page (displaying your name & ID, assignment title, unit name etc.) and a table of contents.
15. No hand-written pages. Avoid printing on both sides of a paper.
*

Order your essay today and save 30% with the discount code: ESSAYHELP
Order your essay today and save 30% with the discount code: ESSAYHELPOrder Now